Bluetooth from bike to helmet,
Bluetooth and cable from bike to helmet, stereo audio and intercom via board electronic
Bluetooth from bike for two helmets1, stereo audio and intercom via board electronic
Bluetooth from bike to one helmet, stereo from bike, Intercom from helmet to helmet2
This Bluetooth Helmet Extension Set from AKE provides a Bluetooth Helmet Connector as built-in version matching for Harley Davidson with helmet plug (7-Pin) and a Stealth Bluetooth Helmet Set with goosneck mikrophone
Bluetooth connection to the bike intercom or to the boom box
Your Harley Davidson intercom is still working with cable helmet sets? No problem, with this Bluetooth Extension Set from AKE you can make your wired helmet connection of your Harley Davidson intercom Bluetooth capable. All other functions of your motorbike intercom, e.g. radio, navigation, two-way radio, mobile phone, etc. can therefore be used without cables. Bluetooth operation either in duplex or stereo. Switching Duplex / Stereo either by pressing the button at the Bluetooth Helmet Connector *. After activating both devices a signal in Duplex mode is transmitted to the helmet. If you want a specific of this operation after switching on, you can report this when ordering.
Bluetooth connection to partners on other motorbikes
The range of the Bluetooth connection for the Bluetooth Extension Set is, depending on installation, approx. 200 m (free field). Therefore, it is possible to add a partner who is driving another motorbike, and an installation of an intercom on the second motorbike would not be necessary! Only requirement is that both motorbikes are driving approximately with the same speed. Thus, all functions of the Harley Davidson intercom can be used at the second motorbike.
The individual components
Each Bluetooth Extension Set comes with a matching Bluetooth Helmet Connector and a high quality Stealth Bluetooth Helmet Set.
The Bluetooth Helmconnector as build-in version comes with a separate control button. This control button can be mounted in place of the helmet socket. The Bluetooth electronics disappears under the respective cover and is there connected to the loose helmet-socket. The power is provided through the 12V on-board power supply.
The Stealth Bluetooth Helmet Set supports the profiles HSP, HFP, AVRCP and A2DP and therefore providing duplex as well as dtereo. All profiles are 100% Bluetooth compatible. The set can invisibly be integrated in the helmet or mounted under the neck guard Available for open helmets, full-face helmets and flip-up helmets.
*) System-induced, a simultanious transmission in Duplex and Stereo is not possible with Bluetooth connections.
1 Bluetooth Helmet Connector PB-HC2 D&S Harley plug-in version
1 On board power connecting cable
1 Stealth Bluetooth-Helmset 201 electronic device
2 Helmet loudspeakers HighVoice
1 Cable helmet microphone
1 Lithium polymer battery
1 power charger
1 Velcro fastener
Operating and installation instructions